Furnace & heating
AC repair
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across East Point
A new AC installation in East Point runs $3,500 to $7,500 in most cases, depending on home size, ductwork condition, and whether you’re going with a standard central system or a heat pump. We install both, and we’ll give you a written price before any equipment gets ordered. East Point’s long, muggy summers mean your air conditioner works from April through October, so getting the load calculation right on day one matters more than the brand name on the condenser. Halden Heating and Air Atlanta has installed systems across Conley Hills, Jefferson Park, and Egan Park, and our crews know the difference between a 1958 brick ranch and a 2005 infill build before they open the front door. Call (912) 616-5481 for a free estimate.
Why Halden Heating and Air Atlanta Is East Point’s Preferred AC Installation Company
We work the way East Point homeowners actually want to work. Book online, get a live arrival time, and track your technician to the door. No four-hour windows. No phone-tag scheduling. Andre Fuller built this team around a simple rule: the price you’re quoted is the price you pay, in writing, before a single tool comes off the truck.
That approach matters even more in East Point because the housing stock is older and trickier. We’ve installed systems in 1960s split-levels on West Forrest Avenue, handled attic replacements in Conley Hills, and converted heating-only ranch homes on Sylvan Road to full central air. Our techs are background-checked and uniformed, and you’ll know who’s coming before they arrive.
Every installation is backed by the 365-Day Done Right Promise. If something isn’t done right, we make it right. That’s a written guarantee, not a handshake. We also include a free second visit if anything fails, because a full year of accountability is the standard, not an upgrade.
Andre leads a team that’s part of the Relay Home Co. network, held to The Relay Visibility Guarantee on every job. Dispatch and scheduling are coordinated from our Atlanta office, but the crews serving East Point live and work right here. You call, a real person answers, 24/7. That’s it.
Styles & brands we work with
Furnace Installation in East Point
Furnace installation in East Point is a different conversation than in the northern suburbs because so many homes here were never designed for central heat. A standard furnace swap in a 1970s brick ranch runs $150 to $700 for repairs when the existing system can be patched, but a full furnace installation paired with a new AC system typically lands inside the $3,500 to $7,500 range depending on efficiency and ductwork. The key question for East Point homes is whether you even need a conventional furnace at all, or whether a heat pump and air handler makes more sense given our mild winters.
Gas Furnace vs. Heat Pump for Older Brick Ranches
Many East Point homes on the Atlanta gas grid still use a traditional furnace paired with central air. But a growing number of streets in Egan Park and Conley Hills have no natural gas line at all. For those homes, a cold-climate heat pump handles both heating and cooling, eliminates the gas bill, and qualifies for utility rebates. We’ll run the numbers on both options and show you the difference in writing.
When to Replace Instead of Repair
If your furnace is older than 15 years, or if the heat exchanger has cracked, replacement is the honest answer. We never push a new furnace on a homeowner who just needs a $200 thermostat or a flame sensor. But East Point’s humidity and long cooling season mean an inefficient furnace paired with an aging AC often gets replaced as a matched system, which improves comfort and cuts the electric bill.
HVAC Installation in East Point
HVAC installation in East Point usually means a matched system: an outdoor condenser or heat pump, an indoor evaporator coil, and an air handler or furnace. Costs for a complete system in East Point run $3,500 to $7,500, with the final number driven by home square footage, duct condition, and the SEER2 rating you choose. For most East Point homes built between 1950 and 1980, the ductwork is the wildcard. Many original ducts were sized for heating only, and the return air side is often undersized, which wrecks both efficiency and humidity control.
Whole-Home Replacements for 2-Story and Split-Level Homes
Split-levels and 2-story homes are the bread and butter of East Point HVAC work, and they almost always need zoning or at least a properly sized return. We’ve seen too many upstairs bedrooms bake in July because the original installer put a 2.5-ton system on a 1,800-square-foot split-level with one return on the main floor. We run a real Manual J load calculation on every install, not a rule-of-thumb guess.
Ductwork Repair and Sealing Before Installation
In East Point’s humid climate, leaky ducts pull in attic and crawlspace air, which means mold, must, and a system that never truly dehumidifies. Before we set a new unit, we seal and repair what’s already there. If the ducts are too far gone, we’ll quote replacement honestly and show you the energy savings.
Trusted Brands We Service in East Point
Our techs are certified to install and service Bryant, American Standard, Carrier, and Trane equipment, and we stock replacement parts at our Atlanta distribution office for same-week turnaround across East Point. If you already have a brand preference, we’ll match the right condenser and evaporator coil to your home’s actual load calculation, not a one-size-fits-all chart. That’s the difference between a system that cools on day one and a system that cools and dehumidifies correctly for a decade.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in East Point Homes
- Undersized tonnage on 1950s-70s brick ranches. Original ductwork was sized for heating only, and East Point’s long humid summers push these systems past their limit. Frosted evaporator coils and dead compressors follow within a few seasons.
- Mineral scale from hard city water. East Point pulls water from the Flint River basin through the Atlanta-Fulton County Water Treatment Plant, which softens but leaves behind calcium and magnesium. That scale builds up on evaporator coils and clogs condensate drain lines, especially in attic-mounted systems in Conley Hills.
- Abandoned gravity furnaces still connected to floor grates. In older homes, the basement gravity furnace is often abandoned in place, but the old asbestos-wrapped ducts still run to floor registers, now hidden under carpet. Return air gets pulled from unsealed crawlspaces, wrecking humidity control.
- Exposed condenser coils on rural properties. On large lots and unpaved country roads just outside East Point proper, installers who don’t account for no wind shelter and direct sun get nuisance high-head pressure trips on the first 95-degree day. Placement and shade matter.
Pricing for AC Installation in East Point, GA
Here’s what an AC installation in East Point actually costs in 2026. These are written price ranges we quote from every day, not national averages. A standard central air installation on an existing ducted home runs $3,500 to $7,500. A heat pump installation lands in the same $3,500 to $7,500 range, depending on whether you need backup heat strips and what SEER2 rating you choose. What moves the number: home square footage, ductwork condition, whether your electrical panel needs an upgrade, and whether the evaporator coil must be replaced to match the new condenser. Every quote is free, in writing, and locked before any work starts. Call (912) 616-5481 and we’ll send a technician to measure your home and hand you a fixed price.
| Service | Price Range |
|---|---|
| AC Installation | $3,500 – $7,500 |
| Heat Pump Installation | $3,500 – $7,500 |
We Also Serve Cities Near East Point
Our East Point crews regularly run jobs in Atlanta, Union City, Riverdale, and Chamblee. If you’re just outside the East Point city line, call us anyway. We’ll let you know the exact arrival time and send a technician who knows your neighborhood’s housing stock. Learn more about our AC Installation service across the metro, or see how we serve East Point specifically.
Serving East Point, GA - Our Local Coverage Area
We’re based in the East Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in East Point
The answer is East Point’s hard city water from the Flint River basin. The Atlanta-Fulton County Water Treatment Plant softens the water but leaves behind dissolved minerals that precipitate out on cold evaporator coils. In Conley Hills specifically, where many systems are attic-mounted, that mineral scale builds up fast and clogs the condensate drain line, causing overflows that leak through ceilings. We install float switches and schedule seasonal drain cleanings on every Conley Hills install for exactly this reason. Call (912) 616-5481 if you’re seeing water stains on a ceiling below your attic unit.
For most East Point homes without natural gas, yes, a heat pump is the right answer. A cold-climate heat pump handles both cooling and heating, eliminates the need for a propane or electric furnace, and qualifies for federal and utility rebates that can offset the upfront cost. It’s especially smart in East Point’s mild winters, where a heat pump runs efficiently most of the year. We’ll spec one that matches your home’s heating and cooling loads and give you a written price before anything is ordered.
For East Point’s long cooling season, we recommend 15 SEER2 or higher. Anything below that struggles to dehumidify properly, and our hot, sticky summers put a lot of runtime on the system. A 17 SEER2 unit with a variable-speed air handler will keep indoor humidity around 50% even on the worst August days, and the lower electric bill pays for the difference over time. We’ll show you the efficiency math in writing so you can decide with real numbers.
Yes, and it’s a job we’ve done many times across Conley Hills and Jefferson Park. The old gravity furnace gets abandoned in place or removed, and we run new supply and return ductwork, typically through the attic or crawlspace. The key step is sealing off the old floor grates and connecting the new system to properly sized returns, because if return air pulls from an unsealed crawlspace, your indoor humidity will stay high no matter how efficient the new unit is. We handle the full conversion in one job, with a written scope and fixed price.
We size and install dedicated mini-split systems for detached workshops, garages, and outbuildings on larger East Point lots. A mini split gives you independent heating and cooling without tapping into the main home’s ductwork, and it’s the most efficient way to condition a space that isn’t used every day. We’ll come out, measure the building, check the electrical panel, and hand you a fixed installed price. Call (912) 616-5481 and we’ll schedule a visit this week.
Written by Andre Fuller, Owner at Halden Heating and Air Atlanta, serving East Point since 2004.