Furnace & heating
AC repair
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Atlanta
A furnace that won’t fire on a cold January morning in Atlanta needs a fix fast, not a four-hour window. Most furnace repairs in Atlanta run between $150 and $700, depending on the part that failed, and our crews reach neighborhoods from Buckhead to East Atlanta throughout the day. Halden Heating and Air sends background-checked, uniformed technicians with a live arrival time you can track on your phone. No voicemail trees, no price surprises at the door. If your heat is out, call (912) 616-5481 and talk to a real person who can tell you what’s wrong and what it costs before anything gets touched.
Why Halden Heating and Air Atlanta Is Atlanta’s Preferred Furnace Repair Company
Atlanta homeowners keep calling us because we put the price in writing before work starts and we back every repair with a written guarantee. That guarantee is not an add-on. It’s standard on every job, and it includes a free return visit if the repair fails. And because we’re part of the Relay Home Co. network, we operate under The Relay Visibility Guarantee: you get a live arrival time, before-and-after photos, and a tech you can track to your door. No other standard HVAC call in Atlanta works like that.
Our technicians live and work in Atlanta. That matters when it comes to understanding how 1980s-era tract homes off South Cobb Drive behave differently from 1920s bungalows in Inman Park. We know which Carrier, Trane, and Lennox models show up most in this market and we keep common parts stocked locally. When a blower motor fails in a Decatur split-level on a cold snap, our tech can often diagnose it, quote it, and fix it the same visit.
Andre Fuller leads our Atlanta team with a simple rule: if the repair fails inside the coverage window, we come back at no charge. That’s the whole standard. Homeowners have heard a lot of fuzzy promises from HVAC companies, so we make ours boringly specific.
Styles & brands we work with
Furnace Maintenance in Atlanta
Furnace Maintenance in Atlanta is the single best defense against the failures that shut down heat on the coldest mornings and drive repair costs up. A full maintenance visit in Atlanta typically costs between $80 and $200. During that visit, the tech cleans the burners, checks the flame sensor, measures gas pressure, inspects the heat exchanger for cracks, and tests the blower motor’s amp draw. For older systems in damp crawl spaces or unconditioned basements, the inspection catches corrosion and rust before a motor seizes.
Heat Exchanger Inspection
The heat exchanger is the metal chamber that separates the fire from the air your family breathes. A cracked exchanger can leak carbon monoxide into the house, which is why this check is non-negotiable on older Atlanta furnaces. We inspect with a scope and a combustion analyzer during maintenance. A heat exchanger inspection runs $200 to $400 if it’s part of a specialized call.
Flame Sensor and Ignitor Checks
Atlanta’s humid air accelerates corrosion on flame sensors, and a dirty sensor is the most common reason a furnace short-cycles or refuses to stay lit. During a maintenance visit, we clean the sensor and test it under load. Ignitor replacement runs $150 to $350 when the part fails outright.
Heat Pump Repair in Atlanta
Heat Pump Repair in Atlanta has its own quirks because nearly half the homes in this market run a heat pump rather than a gas furnace. Heat pumps are efficient for mild Georgia winters, but when a freeze hits and the unit lacks proper defrost controls, the condenser coil ices over and the system stops producing heat. A no-heat call for a heat pump in Atlanta usually means a defrost sensor, reversing valve, or refrigerant issue, and repairs run $150 to $700 depending on what’s wrong.
Defrost Control and Reversing Valve Testing
When a heat pump freezes during one of Atlanta’s rare cold snaps, the first thing our techs check is whether the defrost board is sending the unit into defrost mode at all. Many units in Atlanta’s tract homes were installed without the defrost sensors being properly set up. Calibration or replacement of a defrost control typically falls in the $150 to $350 range.
Condensate Pan and Coil Corrosion
High humidity means Atlanta’s heat pumps develop rusted condensate pans faster than systems in dry climates. Rust flakes clog drain lines, water backs up, and the blower motor bearings corrode. A tech who knows Atlanta checks for this on every call because it causes squealing, then seizure. Blower motor replacement runs $400 to $700 on most units.
Trusted Brands We Service in Atlanta
Our techs are certified to work on Carrier, Trane, Lennox, and Goodman equipment, which covers the majority of what’s installed in Atlanta homes. Because we’re local, we keep parts for these brands in stock or available same-day from Atlanta supply houses. That means a Trane ignitor failure in a Sandy Springs townhome or a Goodman blower motor in a Morrow ranch doesn’t wait on a cross-country shipment. We tell you the brand-specific part cost before we install it, with the repair covered by our written guarantee.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Atlanta Homes
- Undersized ductwork in 1980s-2000s tract homes. Original ducts were often sized for older, lower-static-pressure blowers. A newer high-efficiency furnace can push static pressure above 0.5 in. w.c., causing noisy airflow, uneven heat, and premature blower motor failure.
- Tripped limit switches on cold mornings. When high static pressure overheats the heat exchanger, the limit switch trips and shuts the furnace down. Homeowners in Atlanta often report this as “the heat works for a few minutes, then stops” on the first truly cold mornings.
- Heat pumps freezing in defrost mode. Atlanta’s mild winters mean many heat pumps in this market never had proper defrost controls installed. During a freeze, ice builds on the condenser coil, and the house loses heat entirely. This is a repair issue, not a maintenance oversite.
- Rusted condensate pans and corroded blower bearings. Crawl-space furnaces in Atlanta sit in humid, enclosed air. Condensate pans rust through, bearings corrode, and the first sign is usually a high-pitched squeal from the blower section. If left alone, the motor seizes.
Pricing for Furnace Repair in Atlanta, GA
Most furnace repairs in Atlanta run between $150 and $700, and the majority of jobs land between $250 and $450. The biggest driver of cost is which part failed: a capacitor is cheap and quick, a blower motor is more expensive, and a heat exchanger is a major replacement decision. Here’s the breakdown for common Atlanta furnace repairs:
| Service | Typical Price Range |
|---|---|
| Furnace Repair Diagnostic | $150 – $250 |
| Capacitor Replacement | $150 – $350 |
| Heat Exchanger Inspection | $200 – $400 |
| Thermostat Calibration | $150 – $250 |
| Blower Motor Replacement | $400 – $700 |
Every quote is written before work starts, and every repair is covered by our written guarantee. If the fix fails inside the coverage window, we return at no charge. Call (912) 616-5481 for a free estimate.
Here’s the thing about furnace repair in Atlanta that most companies won’t spell out: a like-for-like swap often disappoints in an older house. In Atlanta’s post-1980 suburban tract homes, original ductwork was sized for older blowers that moved air differently. Today’s high-efficiency furnaces push more static pressure, and when that number climbs above 0.5 inches of water column, the blower works harder, airflow gets noisy, and heat distribution between the upstairs and downstairs of a two-story floor plan becomes noticeably uneven. That’s why we measure static pressure before recommending any equipment change. It costs a few minutes and tells you whether a new furnace will actually fix the comfort problem or just replace a metal box while the real issue is in the ducts.
We Also Serve Cities Near Atlanta
Beyond our Furnace Repair coverage in Atlanta proper, our crews run calls to nearby Decatur, Union City, Morrow, and Riverdale. If you’re in one of those communities, the same up-front pricing and written guarantee apply. To confirm scheduling for your address, call (912) 616-5481. For more about our coverage area, see Furnace Repair in Atlanta.
Serving Atlanta, GA - Our Local Coverage Area
We’re based in the Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Atlanta
The most common cause is undersized original ductwork in post-1980 two-story tract homes. The ducts were sized for older blowers, and a newer furnace pushes static pressure too high, so the upstairs registers starve for air. We measure static pressure on-site and quote a duct modification or zoning solution only after the numbers confirm it. Call (912) 616-5481 for an inspection.
You can physically replace the furnace, but in many Buckhead homes built in the 1990s, the ductwork was undersized to begin with. A high-efficiency furnace on those ducts often underperforms. We run a static pressure test and inspect the duct condition before recommending a furnace-only swap. Call (912) 616-5481 to have a tech measure your system.
A heat pump that freezes during a cold snap usually has a failed or miscalibrated defrost control. The unit is supposed to briefly shift into defrost mode to clear the ice, but many Atlanta installations skipped that setup step. It’s a repair issue, and it’s usually fixable for between $150 and $350. Call (912) 616-5481 for a diagnostic visit.
Yes. Atlanta’s high humidity rusts condensate pans quickly in crawl spaces. A rusted pan often means the blower motor bearings have been exposed to the same moisture. If you hear squealing from the furnace, the motor may be next. We inspect both during a diagnostic call and quote repairs upfront.
A cracked heat exchanger leaks carbon monoxide into your home, and that risk increases in Atlanta because hot, humid summers followed by winter heating cycles cause repeated metal expansion and contraction. If you smell a sharp odor near the furnace, see soot, or get headaches when the heat runs, call (912) 616-5481. We inspect with a combustion analyzer before recommending any repair.
Written by Andre Fuller, Owner at Halden Heating and Air, serving Atlanta since 2004.