Furnace & heating
AC repair
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Atlanta, GA
Furnace repair in Atlanta typically runs between $150 and $650 depending on the part that failed, and most jobs are completed the same day we diagnose them. We’re Halden Heating and Air Atlanta, and we’ve been fixing furnaces here since 2004, with a written price in your hand before any work starts. If your heat kicking on and off, blowing cold air, or making sounds it shouldn’t, call us at (912) 616-5481 and we’ll get a technician to your door with a live arrival time you can track on your phone.
Furnace repair covers everything from a failed ignitor to a cracked heat exchanger, and it’s the core of what our Heating & Furnace in Atlanta service handles. If you’re on our home page looking for a company that books online and shows you exactly who’s coming, this is that experience applied to your furnace.
When You Need Furnace Repair
Atlanta furnaces get a real workout from late October through early March. We see the same patterns every winter, and these are the signs our customers in neighborhoods like Cabbagetown, East Atlanta, and Buckhead call us about most:
- Your furnace is short cycling. That means it kicks on, runs for two or three minutes, shuts off, then repeats. It’s usually a dirty flame sensor or a failing limit switch, and it wears out the blower motor fast if it keeps happening.
- The burner won’t stay lit. If the furnace tries to start and the flame goes out within seconds, the flame sensor (the safety component that confirms gas is actually burning) probably needs cleaning or replacement. This is one of the more affordable fixes we do, typically under $250.
- Cold air is blowing from your vents. Your furnace is running but not producing heat. Could be the ignitor, could be a gas valve issue. Both are repairable, and in Atlanta’s cold snaps you want this diagnosed before a full freeze hits.
- You smell gas or a metallic burning odor when it runs. A gas smell is a safety issue. Shut the unit off, don’t run it again, and call us. A burning smell after months of non-use is often just dust burning off, but gas is a different story and needs immediate attention.
- Your energy bill spiked for no clear reason. A furnace running with a failing component works harder and draws more power. If December’s bill jumped and your weather didn’t, the furnace is often the culprit.
- The blower runs constantly. That’s the fan that moves warm air through your ducts. If it never shuts off, you may have a limit switch issue or a thermostat problem, and it’ll shorten the life of the motor.
If you’re seeing any of these, we will diagnose the issue and show you the written price before we touch a tool. No guessing, no upsell, no surprise line item you didn’t approve.
Our Furnace Repair Process
Here’s what happens when you call Halden Heating and Air Atlanta for furnace repair. It is designed to remove every friction point that makes HVAC calls frustrating, from the scheduling to the invoice.
- You call or book online and get matched with a live arrival time. Reach us at (912) 616-5481. A real person answers, takes your address and symptom notes, and schedules a technician. You will get an arrival window you can track, not a four-hour range.
- Your technician arrives and does a diagnostic, not a sales pitch. We check the ignitor, flame sensor, gas valve, blower motor, limit switches, and the heat exchanger if there’s any sign of stress. You get a plain-English explanation of what’s broken, what the part does, and what we recommend.
- You approve a written price before any work starts. That means the diagnostic findings, the part cost, the labor, and the total are on paper. You see it, you agree to it, then we start. No handshake pricing, no “we’ll see once we get into it.”
- We complete the repair and test the full heat cycle. The unit gets run through multiple cycles, including startup, full burn, and shutdown, so we can confirm the fix holds. We also take before-and-after photos so you can see what we repaired, even if you weren’t standing next to us.
- You receive your written guarantee on the spot. Every repair at Halden comes with a written guarantee. If the repair fails within the coverage period, we return at no charge. That guarantee includes a free second visit automatically. It’s not an add-on and it’s not a courtesy.
Furnace Repair Pricing in Atlanta
Here’s the honest breakdown of what furnace repair costs in metro Atlanta right now. We publish these ranges because The Relay Visibility Guarantee means every customer gets a written price before work starts. That’s the standard. Here’s what you’re likely looking at:
| Repair Type | Typical Atlanta Cost Range | What It Involves |
|---|---|---|
| Flame sensor cleaning or replacement | $125 – $250 | Cleaning the sensor that detects the burner flame, or replacing a worn one |
| Ignitor replacement | $200 – $400 | The hot surface ignitor (the part that heats up to light the gas) gets swapped out |
| Limit switch replacement | $180 – $350 | Replacing the switch that shuts the furnace down if it overheats |
| Blower motor replacement | $450 – $900 | Full motor swap, including the capacitor that starts the motor |
| Gas valve replacement | $350 – $650 | Replacing the valve that controls gas flow into the burners |
| Heat exchanger replacement | $1,200 – $2,800 | Major repair. In many Atlanta homes, this is the point we walk through repair vs. replace with you honestly |
Three things change an Atlanta furnace repair price: the part that failed, the age of your furnace, and whether it’s a brand-specific component. A Bryant or American Standard part may cost more than a generic equivalent, but we source the correct OEM part for your unit so the fix holds. If you have a Carrier, Trane, or Goodman system, we’re certified on those too and handle warranty claims when applicable.
Every repair comes with a written guarantee, and quotes are free. Call (912) 616-5481 and we’ll give you a real number before we ever step on the driveway.
FAQs – Furnace Repair
How much does furnace repair cost in Atlanta?
Most furnace repairs in Atlanta run between $150 and $650, with the most common fixes (flame sensor, ignitor, limit switch) falling in the $125 to $400 range. More involved repairs like a blower motor or gas valve replacement can push $900 or more. The only way to know your exact price is a diagnostic, which is why we give you a written estimate before any work starts. Call (912) 616-5481 for a free estimate over the phone or to get a technician scheduled.
Can you repair a furnace the same day?
Yes. In most cases, we can have a technician at your Atlanta home the same day you call, especially for no-heat emergencies in the winter. Our standard is a live arrival time you can track, not a broad window, and we will tell you if same-day isn’t possible before you commit. For after-hours calls, our 24/7 phone line is answered by a real person every single time, so you’re never leaving a voicemail at midnight.
Is it cheaper to repair or replace a furnace in Atlanta?
If the repair is under $900 and your furnace is under 12 years old, repairing is usually the smarter financial move. Once you’re looking at a cracked heat exchanger or a dead blower motor on a 15+ year old unit, replacement often makes more sense because you’re avoiding a second major repair in the next year or two. We’ll walk you through both numbers honestly and you’ll see the repair price and the replacement price side by side before making a decision.
What furnace brands does Halden Heating and Air Atlanta repair?
We repair all major brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. If your unit is less common, we’ll still diagnose it and if the part is available, we’ll fix it just the same. Our techs are trained on the specific startup, shutdown, and safety sequences of each of these brands, so you’re not getting a generic diagnostic.
Do you charge for a furnace repair estimate?
No. Estimates are free, and a written price is always delivered before any work starts. If you call with a clear symptom and model number, we can often give you a ballpark number over the phone, but the final written price comes after the diagnostic and before any repair. There is never a fee for the quote, and you’re never obligated to approve the work.
Why Atlanta Homeowners Call Halden for Furnace Repair
We’re an independently owned and operated business under the Relay Home Co. network, founded in 2004 and run by Andre Fuller. The relationship we have with our customers in Atlanta is built on a simple promise: you see the price before we start, you get a written guarantee on every repair, and if it fails, we come back for free. That is the standard, not a special offer.
Book your furnace repair by phone at (912) 616-5481 or schedule online. You’ll get a live arrival time, a real person on the phone when you call, and a written price before any work begins. That’s how furnace repair should work in Atlanta.
Written by Andre Fuller, Owner at Halden Heating and Air Atlanta, serving Atlanta.